M22x1.5 Radiator Fan Switch 100-95, 110-105c Dual Stage (Universal)

Description

M22x1.5 Radiator Fan Switch 100-95, 110-105c Dual Stage (Universal)

High quality EU-made thermostat sensor for radiator fan control.

Dual Stage operation, perfect if you have two electrical fans.

Specification:

Switching temp Fan 1: ON 100°c, OFF 95°c (ON 212°F, OFF 203°F)
Switching temp Fan 2: ON 110°c, OFF 105°c (ON 230°F, OFF 221°F)
Thread size: M22 x 1.5
Contact Type: 6.35 x 0.8 mm (1/4 “) Blade Connectors
Voltage: 12-24 volts
Maximum amperage: 10 Amps
Electrical contact: Normally open
Mechanical service life: 1000000 operations
Approval: CE marked

Sold individually.

Important information:

-The switch is not capable of handling a fan with direct current, it needs to control the fan via a relay.

-Remember to choose a thermocouple that is dimensioned about 10-15°c higher than the opening temperature of the thermostat. For example, if the thermostat opens at 80°c then you should choose a contact that is activated at 90-95°c.

-It is recommended that you install the thermal connector on the outlet side / cold side of the engine cooler.