850 / V70 Sprung 6 Puck

Description

6-puck

Diameter: 228mm
Number splines: 20st
Thickness: 8,1mm

NOTE:
One must chimsa pressure plate 1mm because the lamella is 1mm thicker than the original
Otherwise there is a risk that the lamella breaks at decoupling
These are under the pressure plate chims

Not suitable for the newer (about 2002) with 23 splines

Then there are different pressure plates and flywheel for vitmotorn it is not certain that the slats with a sprung center fits all models
Use standard 6–Puck dumb fin instead