Foliatec Hard Rock Liner 400ml 2K Spray – Black

Description

Foliatec Hard Rock Liner 2K paint on spray can.

Perfect for spraying rims or other details in “Bedliner style”, ie. “pickup bedliner protection paint”.

Hard Rock Liner is a robust and durable paint with an aggressive look.

Provides a rough and hard surface that is resistant to both scratches, chemicals and high and low temperatures.

NOTE, this is not a dip paint but a two-component paint that is NOT removable!

The hardener is already built into the spray can and muste be activated before use.

Color: Black

Volume: 400 ml

Instructions:

Sand, clean, degrease and dry the surface to be sprayed.

Preparation of the 2K spray can:

1. Shake the can well before use. Remove the red push button from the lid immediately before spraying.
2. Rotate the can 180° and attach the red push button to the pin on the bottom of the can.
3. Press the red button as far as it will go. Shake the can again after activating the hardener.
4. The can is now ready to use!

NOTE! After the hardener has been activated, the processing time of the can is approximately 1.5 hours at 20°C.

Apply Hard Rock Liner in two coats at a distance of about 70-110 cm. Let dry for 5-10 minutes between each layer.

After 60-70 minutes, Hard Rock Liner is dry to touch but must be allowed to continue to dry for about 24 hours at 20°C.

Full curing occurs after 6-7 days.