V2 Coilovers Audi A6 A7 (C7) 2WD/AWD 2011-2018

Description

V2 Coilover kit for Audi A6 & A7 (C7) model year 2011-2018.

These coilovers fit both front-wheel drive (FWD) models and four-wheel drive (AWD / Quattro) models!

NOTE, not for cars with original air suspension.

V2 is an affordable kit for the street car!

Equipped with length-adjustable shock absorbers, which makes it possible to lower the car very much and still drive with good road holding.

Thanks to the unchanged spring tension regardless of height, there is also no risk of loose springs, which is otherwise relatively common for coilovers of simpler design.

Technical specification:

Front lowering: 30-80 mm
Rear lowering: 30-80 mm
Front design: Coilovers / height-adjustable struts
Rear design: Height-adjustable shock absorbers & springs
Front top mounts: Reuses original
Rear top mounts: Reuses original
Material: Gas shock absorber in galvanized steel for good durability
Seals: Japanese NOK seals
Warranty: 1 year

NOTE! Check the condition of the top mounts before mounting, if they are old and worn, we recommend that you change to new ones!

INFO! Cars that are equipped with electronically adjustable shock absorbers can show an error code when fitting coilovers and other aftermarket road holding kits. This can often be remedied via coding / programming or by purchasing modules that simulate the electronic shock absorbers. In such cases, this is sold separately and is not included in the kit.