V2 Coilovers Audi A3 (8P) 2003-2012/9

Description

V2 Coilover kit for Audi A3 (8P) year model 2003-2012/9.

This coilover kit also fits the following car models:

Audi A3 (8P) – 1.2 TFSi, 1.4 TFSi, 1.6, 1.8 TFSi, 2.0, 2.0T, 1.9 TDi, 2.0 TDi (2003-2012/9)*
Seat Altea/XL (5P1) – 1.4, 1.6, 1.9 TDi, 2.0, 2.0T, 2.0 TDi (2004-)*
Seat Leon (1P1) inkl. Cupra – 1.4, 1.6, 1.9 TDi, 2.0, 2.0T, 2.0 TDi (2005-2013/1)*
Seat Toledo (5P2) – 1.6, 1.9 TDi, 2.0, 2.0T, 2.0 TDi (2004-2009/5)*
Skoda Octavia (1Z) – 1.4, 1.6, 1.8T, 1.9 TDi, 2.0, 2.0T (2004-2013/6)*
VW EOS (1F) – 1.6, 2.0, 2.0T, 1.9 TDi, 2.0 TDi, 3.2i (2004-2013/5)**
VW Golf 5 (1K) inkl. Plus, Variant – 1.4, TSi, 1.6, 2.0, 2.0T, 1.9 TDi, 2.0 TDi (2003-2009)**
VW Golf 6 (1K) inkl. Plus, Variant – 1.2, 1.4, TSi, 1.6, 1.6 TDi, 2.0, 2.0T, 2.0 TDi (2008-2012/9)**
VW Jetta Mk3 (1KM) – 1.4, TSi, 1.6, 1.9 TDi, 2.0, 2.0T, 2.0 TDi, 3.2 (2004-2013/5)**
VW Passat (3C) inkl. Variant – 1.6, 1.9 TDi, 2.0, 2.0T, 2.0 TDi (2006-2014)**
VW Passat CC (3CC) – 1.8T, 2.0T, 2.0 TDi (2008-)**
VW Scirocco (13) – 1.4 TDi, 2.0 TSi, 2.0 TDi (2008-)
VW Touran (1T) – 1.6, 1.6, 1.9 TDi, 2.0, 2.0T, 2.0 TDi (2004-2010)

Fits both manual gearbox and automatic transmission as well as both Ø50mm and Ø55mm front shock absorbers!

NOTE!

* = Only for front-wheel drive (FWD) cars.
** = Fits both cars with front-wheel drive (FWD) and four-wheel drive (AWD).

V2 Coils is an affordable budget-kit aimed for the street car!

Equipped with length-adjustable shock absorbers, which makes it possible to lower the car very much and still drive with good road holding.

Thanks to the unchanged spring tension regardless of height, there is also no risk of loose springs, which is otherwise relatively common for coilovers of simpler design.

Technical specification:

Front lowering: 20-110 mm
Rear lowering: 30-90 mm
Front design: Coilovers / height-adjustable struts
Rear design: Height-adjustable shock absorbers & springs
Front top mounts: Reuses original
Rear top mounts: Reuses original
Material: Gas shock absorber in galvanized steel for good durability
Seals: Japanese NOK seals
Warranty: 1 year

NOTE! Check the condition of the top mounts before mounting, if they are old and worn, we recommend that you change to new ones!