TX2 Heater Bypass Valve – 16mm (5/8″) – Push to Bypass

Description

TX2 Heater Bypass Valve – 16mm (5/8″) – Push to Bypass

A high-quality metal heater valve that is commonly mounted to Taxi cars, but also many classic vehicles, kit car models and similar due to the simplicity of its design and operation. Requires a bowden cable to operate (“Push to Bypass-function”).

These valves are used where the thermostat bypass circuit is built into the heater circuit, which will allow you to turn off the flow to the heater, for example whilst still letting water flow back to the engine.

Specification:

Hose Size: Ø16mm (∅5/8″)
Post Size: Ø4.5mm (∅0.18″)
Min Temperature: -40°C (-40°F)
Max Temperature: 110°C (230°F)
Pressure Limit: 3 BAR (Gauge) (43.5 PSI (Gauge))
Material: Zinc Plated Steel
Cable Required: Yes, Bowden Cable with Looped End
Cable Movement: 30mm
Operation: Push to Bypass

Sold individually.

Important information:

– Please note that this heater valve should only be used in a system with an added corrosion inhibitor, for example glycol or anti-freeze or similar, in order to prevent valve corrosion.

– Bowden cable is not included.