SPD Fuel Cell 40L Internal Pumps

Description

SPD Fuel Cell 40 Liter – For Internal Fuel Pumps

This is a greatly improved design of a classic fuel cell. This fuel cell is not equipped with foam but is instead built with splash plates and doors that form a well-functioning catch tank function and which is also reliable for those of you who run on ethanol. This fuel cell is built in 3 mm thick aluminum which makes it very strong and eliminates the risk of it cracking.

The entire tank is adapted to withstand ethanol, with all gaskets in PTFE and other materials in stainless steel or anodized aluminum.

This fuel cell also supports both internal pumps and external ones. In this style, the SPD’s fuel pump fitting is included to install internal fuel pumps. It works with all round pumps on the market and is completely adjustable in height. It is possible to use up to three 60 mm fuel pumps. The fuel tank has two outputs for external pumps that come plugged in this design.

The fuel pump fitting is made so that it gathers all the pumps into one chamber to have only one outlet. This saves a lot of space and money as you avoid Y-crosses, extra hose and AN connections etc. There will be only 1 line to the engine and 1 line back from the engine regardless of whether you use 1 or 3 fuel pumps. If, on the other hand, you use double injector fuel rails (V-motors), you must, however, supplement with a Y-cross.

The tank is equipped with sockets for level sensors.

All holes for internal pumps, refueling and level sensors can be plugged!

Technical specification:

– Sturdy construction in 3 mm thick goods.
– Anodised both externally and internally.
– Up to 3 internal pumps.
– Built-in catch tank function.
– Also supports external pumps.
– No foam that can mess.
– Volume: 40 liters.
– Dimensions: 450 x 340 x 265 mm (510 x 340 x 320 mm with spacers).
– Connections to pump luminaire, 1 x AN12 output, 1 x AN10 return.
– External pump connections 2 x AN12.
– 2 x AN12 connections on the top.

Includes the following accessories:

– Level sensor 0-90 ohms.
– Adapters from the fuel pump bracket to pumps (8 mm post).
– Stainless steel hose clamps.
– Cover plates.
– Distances to lift the tank.
– Fuel hose for submersible mounting (manufactured specifically for submersible mounting and can handle petrol, diesel and ethanol).

Sold individually.