Side Skirts Diffusers Alfa Romeo Brera / Carbon Look

Description

Finish: Carbon Look

SIDE SKIRTS DIFFUSERS ALFA ROMEO BRERA

fits: Alfa Romeo Brera 2005-2010

TYPE OF BODY: SEDAN

VERSION: PREVIFT 

Product information:

• Product made of ABS
• Set consists of two elements: right and left
• Overlays on thresholds are available in 3 types of structure: texture, gloss, imitation carbon fiber
• Gloss and imitation carbon fiber are protected with a protective foil
• They have UV protection
• Does not require painting (If you choose to paint an item, it is necessary to apply primer before painting.)
• The set has stickers that confirm the quality of the product

Diffuser production is a complex process. The final stage of the production is the manual processing of products and their finishing. This demonstrates the care and accuracy of our elements.

Furthermore, the quality control of our products made just before sending them ensures that the defective products are eliminated to a considerable degree.

The material from which our products are manufactured – ABS was created specifically for use in the automotive industry.

ABS is used in production of factory bumpers and other body parts of the car and these products are characterized with increased strength and flexibility.

The proof of the quality of the manufactured products is the TÜV certificate.

It confirms the material from which they are manufactured and the TÜVTAILEGUTACHTEN / ABE for the selected products.

The product that holds the certificate is marked with a red tag above the product code.

By purchasing this product you accept the terms of service.

ABOUT SET

• After the final treatment of the product, a sticker with the TÜV certificate number is affixed and a suitable kit is selected, the current composition is available HERE.
• The finished set is protected in foil with our company logo and then packed into a shipping carton.
• In our offer we also have self-adhesive decorative strips to further enhance the appearance of the diffuser. These stickers are rolled into a roll and are designed for self assembly.
• They can be ordered with the diffuser by selecting the proper variant available at the product.
• You may need to use adhesive when installing the car overlay. In this case, we recommend using polyurethane based adhesive (self-adhesive).
• Both the assembly of the stickers and the assembly of the car’s overlays should be preceded by proper preparation of the surface of the product and the body of the car.

INSTALLATION

• Installation should begin with adjusting products to the car
• For plastic thresholds, mounting involves boring the car’s thresholds, the screws are included in the kit (Screws should be spread evenly over the entire length of the threshold). For metal thresholds, we recommend the use of polyurethane based adhesive (to be purchased on your own).
• Before installing, remove the protective foil from the diffuser
• Installation requires proper preparation of the surface of the product and the body of the car. When using glue (we recommend using polyurethane based adhesive) or tape (we recommend using 3M acrylic double-sided adhesive tape) as an additional adhesive between the elements. The gluing surface must be previously matted and degreased with an aggressive solvent. After applying the glue the binding time is 24h – the car should not be used at this time.

Installation of the overlay should follow the instructions in the manual that is included with the kit shipped.

Maxton Design designs and manufactures car styling focusing on, among other things, bodykits, front and rear bumpers, side skirts, spoilers, diffusers, splitters, wings, eyelids and much more.

The company was founded in 2004 and today has a full-scale and state-of-the-art machinery with everything needed for both design and manufacturing in-house.

Do you want your car to be visible? Then choose Maxton Design as your supplier of styling products for the car!