GKTech S13/180sx/R32 subframe anti-squat reduction weld in kit

Description

GKTech S13/180sx/R32 subframe anti-squat reduction weld in kit

Product description from the manufacturer:

The GKTECH S13 anti-squat reduction weld in kit has been designed for those with an S13 (or R32) rear subframe that want an increase in rear-end grip. Designed from a 3D scan with the addition of CMM data the brackets relocate the front pick up point for your rear lower control arm altering your suspension curves. Laser-cut, steel, and with simple step by step instructions makes modifying your subframe a heap easier than attempting to do it yourself without guidance.

S13/R32 rear subframes have a higher anti-squat value of 45%, changing the pitch of the rear lower control arm by relocating the front pick up near 2 inches lower you are replicating the geometry of an S14/S15 and changing the anti-squat value to 0%. This gives further traction through corner exit, bumps etc by allowing the car to squat (and actually use the suspension as intended). This is a common modification for anyone looking to get more forward bite on their S13 and we’ve now made it easier than ever.

In addition to reducing the anti-squat value, roll center is raised 20mm increasing roll stiffness, anti-lift is reduced from 80% to 20% assisting in braking by reducing wheel travel and preventing droop when hard braking. Bump steer is also reduced by 6mm at 100mm compression/rebound. In short, this is a MUST for S13/R32 owners looking for more traction. 

Vehicle Compatibility: 
– Nissan 180sx 
– Nissan S13 Silvia 
– Nissan R32 GTS/GTS-T Skyline
– Nissan R32 GTR
– Nissan A31 Cefiro
– Nissan C33 Laurel 

NOTE: due to the increase in misalignment in the rear LCA bushes, using aftermarket LCA’s that run spherical bearings/heims or spherical bearing conversion for your OEM rear LCA is recommended as sold here: https://au.gktech.com/s-r-z32-chassis-oem-rear-lca-spherical-bushes-set-of-4

GKTECH started in Melbourne, Australia back in the year 2003 and has been growing strong ever since! As a small team from Australia, they now have warehouses in both Australia, the USA and Japan!

The products are much more than the common knock off products that can be found all over the internet. GKTech has an in-house design and engineering team that develop innovative solutions specifically for Nissan vehicles, with over 200 unique S, R and Z chassis parts, ranging from Silvias, to Skylines, Cefiros, 300zx, 350z and more!

The small devoted team all share the same incredible passion for the Nissan S/R/Z chassis and are all complete motorsport enthusiasts. They don’t just develop parts for these cars as a job must be done, they literally live and breathe them! Frequently driving, competing and attending auto events, the GKTech team make sure their products are tested to the absolute limit during the production process, to keep the highest quality when offered to the end customers.

Due to their passion towards these cars, they are constantly looking to improve the quality and increase the product offering, that’s why they genuinely take advice, feedback and criticism into consideration with every decision that they make to move their business forward.

Choose GKTech as your supplier of custom Nissan parts, and you won’t get disappointed when you need quality and endurance the most, at the track!