GKTech RB/VG clutch fan adapter

Description

GKTech RB/VG clutch fan adapter

Product description from the manufacturer:

If you want to use one of our super dooper awesome clutch fans on your RB/VG series motor then you will need to use one of these billet aluminium adapters. The PCD, bore size and the offset all differ from the SR to the RB/VG but this adapter is hub centric and leaves only a 2mm offset variance when compared to your standard RB/VG clutch fan with the standard clutch. Ie. it means that the fan will sit 2mm’s closer to the radiator when using our clutch fan with this adapter. 

Our clutch fan is a proven performer with over 800 satisfied customers using these on the SR20’s and compared to the RB/VG clutch fan you will see an increase in the air flow of around 40% which is easily noticeable the second that you install the fan.

Vehicle Compatibility: 
– Nissan Skyline R31 RB30E
– Nissan Skyline R32 GTS-T
– Nissan Skyline R32 GTS4
– Nissan Skyline R32 GTR
– Nissan Skyline R33 GTS-T
– Nissan Skyline R33 GTS4
– Nissan Skyline R33 GTR
– Nissan Skyline R34 GT-T
– Nissan Skyline R34 GTR
– Nissan Cefiro A31
– Nissan 300ZX
– Nissan Stagea WGNC34

NOTE: Will not fit VL RB30’s as they use a different clutch pack to the R31 RB30 motor
NOTE#2: The diameter of the fan is the same as an RB/VG clutch fan (430mm’s) and if your intercooler piping runs over the area that the clutch fan sits and you had to trim the standard clutch fan to get it to fit, then this fan will also have this issue and it is strongly advised to NOT trim the clutch fan as it can become unstable and break off causing significant damage. When installing the fan ensure that there is at least 10-20mm’s clearance between the fan and anything around it, keeping in mind that your engine moves when under acceleration and braking.

GKTECH started in Melbourne, Australia back in the year 2003 and has been growing strong ever since! As a small team from Australia, they now have warehouses in both Australia, the USA and Japan!

The products are much more than the common knock off products that can be found all over the internet. GKTech has an in-house design and engineering team that develop innovative solutions specifically for Nissan vehicles, with over 200 unique S, R and Z chassis parts, ranging from Silvias, to Skylines, Cefiros, 300zx, 350z and more!

The small devoted team all share the same incredible passion for the Nissan S/R/Z chassis and are all complete motorsport enthusiasts. They don’t just develop parts for these cars as a job must be done, they literally live and breathe them! Frequently driving, competing and attending auto events, the GKTech team make sure their products are tested to the absolute limit during the production process, to keep the highest quality when offered to the end customers.

Due to their passion towards these cars, they are constantly looking to improve the quality and increase the product offering, that’s why they genuinely take advice, feedback and criticism into consideration with every decision that they make to move their business forward.

Choose GKTech as your supplier of custom Nissan parts, and you won’t get disappointed when you need quality and endurance the most, at the track!