GKTech GTR/Z32 300zx High misalignment Tie Rod Ends

Description

GKTech GTR/Z32 300zx High misalignment Tie Rod Ends

Product description from the manufacturer:

The GKTECH high misalignment tie rods have 64 degrees of misalignment and also up to 25mm of bump steer correction built in. 

Although these may look pretty similar to other tie rod ends on the market, don’t be fooled as they are different (in a good way). Almost all tie rod ends on the market that use rose joints are NOT using high misalignment bearings and wear out in no time at all. OEM type tie rod ends provide around 60 degrees of misalignment and it is critical that around this level of misalignment is kept. Another common issue with most aftermarket style tie rod ends is that there is no protection from dust and dirt. We’ve developed dust boots specifically to suit the PCYML10T rose joints that we use in our kit. It’s also pretty common for shanks to bend under high loads, our shanks have a tensile strength of 176ksi (class 12.9)

Bump steer correction is altered through the use of 5mm shims. 

– Corrects bump steer up to 25mm 
– Uses high quality PTFE lined 1 5/8″ high misalignment rose joints 
– Dust boots included 

Vehicle Compatibility:
– Nissan Skyline R32 GTS-4
– Nissan Skyline R32 GTR
– Nissan Skyline R33 GTR 
– Nissan Skyline R34 GTR 
– Nissan 300ZX Z32
– Nissan Stagea

NOTE: These tie rod ends are only to suit OEM knuckles or knuckles that use an OEM taper.

NOTE#2: If you have the Gktech Super lock R/Z chassis knuckles these tie rod ends will not fit.
You would need these: https://au.gktech.com/high-misalignment-64-degrees-tie-rod-ends-12mm-14mm

GKTECH started in Melbourne, Australia back in the year 2003 and has been growing strong ever since! As a small team from Australia, they now have warehouses in both Australia, the USA and Japan!

The products are much more than the common knock off products that can be found all over the internet. GKTech has an in-house design and engineering team that develop innovative solutions specifically for Nissan vehicles, with over 200 unique S, R and Z chassis parts, ranging from Silvias, to Skylines, Cefiros, 300zx, 350z and more!

The small devoted team all share the same incredible passion for the Nissan S/R/Z chassis and are all complete motorsport enthusiasts. They don’t just develop parts for these cars as a job must be done, they literally live and breathe them! Frequently driving, competing and attending auto events, the GKTech team make sure their products are tested to the absolute limit during the production process, to keep the highest quality when offered to the end customers.

Due to their passion towards these cars, they are constantly looking to improve the quality and increase the product offering, that’s why they genuinely take advice, feedback and criticism into consideration with every decision that they make to move their business forward.

Choose GKTech as your supplier of custom Nissan parts, and you won’t get disappointed when you need quality and endurance the most, at the track!