ASS Engine mounts BMW E36 / E46 – M50 / M52 / M54

Description

Engine mounts BMW E36 / E46 – M50 / M52 / M54

Replaces original engine mounts on the BMW E36 / E46 for the M50 / M52 / M54 engines, thus the engine gets the same tilt and position as the original.

Developed for LHD – Left-hand drive cars.

Adapted with different hole patterns against engine blocks to fit both E36 and E46.

Very stable mounts that fit perfectly and can withstand really hard grips. No risk of losing the engine as on the original mounts where the aluminum breaks easily or the rubber cushion splits.

The mounts are designed to also provide good space to be able to drive with a rear hanging turbo.

Tested with various universal exhaust manifolds for turbo available on the market. Also tested with good results on both Garrett GT35 and Holset Super HX40 (see example pictures).

Bracket for the power steering fluid container is included.

Made of 5 mm high-strength steel sheet and galvanized in matt black paint.

A stable rubber bushing keeps the engine in place.

A set of mounts consists of:

Engine mounts incl. bushings and all screws / nuts needed for mounting in beam and motor (see list below).

– 2 pcs Screw M14x100
– 4 pcs Washers M14
– 2 pcs Locknuts M14
– 9 pcs Flange screw M8x20
– 2 pcs Flange screw M10x20
– 2 pcs Flange nut M10
– 1 pcs Screw M8x12 hex key
– 1 pcs Mount for the power steering fluid container

Mounting:

These mounts completely replace original mounts. Developed for LHD / left-hand drive models.
Same position and inclination of the engine as the original.
See the product picture for the different hole pictures in engine blocks for E36 and E46.
The brackets in the beam are screwed together with M14 bolt from joint to link arm and M10 screw + nut.
The bracket for the reservoir for the servo oil is also included.

High quality product from Andersson Steel & Speed ​​- Made in Sweden!