Car Gods Clay Bar Kit

Description

Claying is often overlooked by the average car owner, but for those who have discovered its effect and the god-like result that comes with it, Claying becomes an important part of every reconditioning.

The gently mixed lubricant together with the clay in Morpheus allows you to remove insignificant surface contaminants while leaving the vehicle’s paint extremely smooth and clean, as in a dream simply.

The kit includes:

Car Gods Clay Bar Lubricant – 500 ml
Car Gods Clay Bar / Cleaning Clay – 100g

Instructions for use:

1. Wash the vehicle very thoroughly.
2. Knead the clay until soft (warm lightly if necessary).
3. Shake the bottle well and turn the nozzle to “on”
4. Process one small section at a time (approximately 30 x 30 cm). Apply Morpheus Clay Bar Lubricant abundantly over the area to be treated.
5. Make sure that the paint surface is always lubricated when using Morpheus Clay Bar / Cleaning Clay.
6. Slide the clay over the surface in straight lines and slowly treat the surface until it is smooth to the touch.
7. Continue to treat each small section at a time and knead the clay as needed.
8. If the surface is heavily contaminated, repeated kneading and turning of the clay is recommended.
9. Wipe the entire section with a microfiber cloth after the treatment and check if any stains need to be treated again before proceeding to the next part.
10. When finished, turn the nozzle to “off”.

NOTE! If the clay is dropped on the floor or becomes contaminated in any way, it must be thrown away immediately! Store the container with the lubricant in a standing position and secure during transport.