Foliatec Interior Paint Red Matte 400 ml

Description

Foliatec Interior Paint.

High quality and fast drying interior paint for plastics, PVC, fabric, artificial leather and genuine leather. This durable and stain-free paint penetrates deep into the material and creates a permanent and elastic adhesion while the texture of the surface remains the same.

Color: Red glossy.

Volume: 400 ml.

Instructions:

1. Mask the nearby surfaces to the interior to be sprayed.

2. Clean the surface to be sprayed with Foliatec Interior Cleaning, do not use solvent. The surface must be completely clean from dirt and grease. Dirt in grooves can be removed with, for example, a brush. Wipe the cleaned surfaces with a dry cloth, there must be no moisture left from the cleaning agent on the surface to be sprayed!

3. (Only for hard plastic surfaces) Prepare the surface with Foliatec Interior Paint Primer. This allows the paint to get the best adhesion to the surface. Then allow the primer to dry for at least 1 hour at room temperature before proceeding to the next step. NOTE! Use a protective mask to avoid inhalation of the spray primer.

4. Begin spraying about 20-25 cm in thin layers until the color covers as desired. Wait about 5-10 minutes between each layer depending on temperature etc. If the layers of color are too thick, there will be drainage. Allow the paint to dry for at least 1 hour at room temperature. NOTE! Use a protective mask to avoid inhalation of the spray paint.

5. (Optional step) Apply a protective layer with Foliatec interior paint seal.

6. Enjoy the result!

Notice! On non-absorbent surfaces, e.g. hard plastics and the like, you can remove the paint with the help of Foliatec Interior paint removal. However, this is not possible on, for example, fabric, leather or ceiling, etc.!

NOTE! Do not use in direct sunlight!

Sold individually.