ON/OFF Electric Heater Valve 12V/24V – 16mm (5/8″)

Description

Electric Heater Valve & Control Knob 12V/24V – 16mm (5/8″)

A high quality fully electric heater control valve with ON/OFF control function only, for use with a 2-position rocker or rotary switch or similar.

The heater valve is designed for use within automotive heating circuits and it is of course compatible with all common glycol and anti-freeze mixtures.

Specification:

Hose Size: Ø16mm (Ø5/8″)
Minimum Temperature: -10°C (14°F)
Maximum Temperature: 110°C (230°F)
Weight: 0.175 kg (0.385 lbs)
Flow Rate: > 900 L/hr (> 198 gal/hr)
Operation: Open or Closed
Voltage: 12 Volt / 24 Volt DC (Direct Current)
Working Voltage: 9-32 Volt DC
Current Continuous: 0.1 Ampere
Rotation Angle: 90°
Certification: TS16949 / ISO9001
Warranty: 24 Months!

Wiring Information:

The electric valve is very simple to install and operate, the only thing required is a two position ON/OFF switch for control. When voltage is applied to the signal wire (Blue colour) then the valve will open, and when voltage is removed it will revert back to the normally closed position. Please note that the Red wire needs to be permanently connected to Positive as this is the power source for the internal electric motor.

Wire Colour:

1x Red – Positive Supply from Switched Ignition Source (recommended wire size is 1.0mm²)
1x Blue – From ON/OFF Switch (recommended wire size is 1.0mm²)
1x Black – Earth / Ground (recommended wire size is 1.0mm²)

Sold individually.