ASS Engine mounts Volvo 240/260 – B23 / B230 Straight-set / Zero degrees inclination

Description

ASS – Andersson Steel & Speed ​​Engine mounts for Volvo 240/260 for B23 / B230 Straight-set / Zero degrees inclination

Very stable mounts that can withstand hard grips. No risk of losing the engine as on the original mounts as aluminum easily breaks or the rubber cushion splits.

Replaces original mounts and sets the engine straight. So 0 degree inclination. You usually do this to get more space on the exhaust side, if you want plenty of space for manifolds and e.g. turbo.

This entails i.a. that you need to modify the oil pan and gearbox. You can use oil trays from B18 and B20 that fit bolt on. There will also be less space on the intake side so you may also need to modify the intake.

The engine is at the same height, if you measure up to the center crankshaft, and depth as original.

A stable rubber bushing keeps the engine in place.

NOTE! Does not fit engine block B234!

They are made of 5 mm high-strength steel sheet and are Zinc iron chromated and black-passivated. A good quality of galvanizing that the automotive industry often requires.

A set of these engine mounts consists of: mounts incl. bushings and all screws / nuts needed for mounting in beam and engine.

Includes screws:

– 2 screws M14x100
– 4 pcs washer M14
– 2 pcs lock nut M14
– 7 screws M8x20
– 6 pcs nut M8

Mounted according to the image in the gallery. The left one is on the exhaust side and the right one on the intake side.

Quality product from Andersson Steel & Speed, made in Sweden!

Tip! Are you going to drive one of BMW’s gearboxes? Check out our gearbox beam AS-002003-01 or AS-002004-01.