GKTech Z33 350Z/V35 Front Upper Camber Arms (FUCA’S)

Description

GKTech Z33 350Z/V35 Front Upper Camber Arms (FUCA’S)

Product description from the manufacturer:

The GKTECH 350z/ V35 Front Upper Camber Arms (FUCA’s) are used to adjust the front camber as when you lower your car negative camber is introduced. This then reduces the contact patch of your tyres and thus available traction. Our front upper camber arms will get this issue sorted!

When designing these arms we were able to incorporate more clearance in the balljoint area from the inner wheel well by 10mm, so that the arm doesn’t make contact with the body when extended.

These arms are a direct replacement of the standard arms and allow for -25mm through to +15mm of adjustment compared to the OEM arm. On a stock lower arm we have seen camber as low as -5.5 degrees of camber and as high as +1.0 degrees! With our adjustable lower control arms we have seen as low as -11 degrees of camber for those who want complete adjustability for their setup.

As a completely unique design we have now made it possible to adjust caster, by using stackable shims it allows you to further increase adjustment by + or – 1 degree of caster.

These arms have been CAD designed, FEA tested, they are laser cut from high strength steel, are TIG welded and to finish the arms off they’re E-coated (electrophoresis coating) for rust prevention. 

The arms feature high misalignment PTFE lined rose/ heim joints, that we use in all our suspension arms, that are a common size bearing that can be found at your local bearing supplier, or if you need we do have them on the shelf.

We also include dust boots to keep the bearings protected.

– Lightweight design
– High misalignment PTFE lined common size bearings
– CNC Laser cut high strength steel with CNC machined ends.
– CAD designed, FEA tested and TIG welded
– Balljoint/ Inner wheel well clearance

Vehicle Compatibility:
– Nissan 350z
– Nissan V35 Skyline

GKTECH started in Melbourne, Australia back in the year 2003 and has been growing strong ever since! As a small team from Australia, they now have warehouses in both Australia, the USA and Japan!

The products are much more than the common knock off products that can be found all over the internet. GKTech has an in-house design and engineering team that develop innovative solutions specifically for Nissan vehicles, with over 200 unique S, R and Z chassis parts, ranging from Silvias, to Skylines, Cefiros, 300zx, 350z and more!

The small devoted team all share the same incredible passion for the Nissan S/R/Z chassis and are all complete motorsport enthusiasts. They don’t just develop parts for these cars as a job must be done, they literally live and breathe them! Frequently driving, competing and attending auto events, the GKTech team make sure their products are tested to the absolute limit during the production process, to keep the highest quality when offered to the end customers.

Due to their passion towards these cars, they are constantly looking to improve the quality and increase the product offering, that’s why they genuinely take advice, feedback and criticism into consideration with every decision that they make to move their business forward.

Choose GKTech as your supplier of custom Nissan parts, and you won’t get disappointed when you need quality and endurance the most, at the track!