Description
Downpipe flange angled exhaust housing no. 7
Also fits KKK K24 from Volvo.
Tip! We now also have a stainless steel gasket that fits outside the labyrinth seal itself.
The gasket is here: A4-5-6F1
Characteristics are that the exhaust gases exit slightly to the side of the exhaust housing (they do not go straight back).
The flange only fits in one direction because the CC dimensions between the bolt holes are 2x95mm and 1×105,5mm
(center hole is 71mm)
We also have Downpipe cones to get up to 3,5″ or 4″ directly after the flange (or down to 2,5″)

























