Spoiler Cap Alfa Romeo Brera / Kolfiberlook

Beskrivning

Finish: Kolfiberlook

SPOILER CAP ALFA ROMEO BRERA

fits: Alfa Romeo Brera 2005-2010

TYPE OF BODY: SEDAN

VERSION: POLIFT

Product information:

• Product made of ABS
• The spoiler overlay is available in 3 types of structure: texture, gloss, and imitation carbon fiber
• Only one of the sides (outer side) is covered  with the selected structure
• The inside of the overlay and its finishes are matt
• Each overlay on the inside has a 3M acrylic double-sided acrylic  tape on which it is mounted.
• Gloss and imitation carbon fiber  are protected with a protective foil
• Has UV protection
• Does not require painting (If you choose to paint an item, it is necessary to apply primer before painting.)

Diffuser production is a complex process. The final stage of the production is the manual processing of products and their finishing. This demonstrates the care and accuracy of our elements. Furthermore, the quality control of our products made just before sending them ensures that the defective products are eliminated to a considerable degree.

The material from which our products are manufactured – ABS was created specifically for use in  the automotive industry.

ABS is  used in production of factory bumpers and other body parts of the car and these products are characterized with increased strength and flexibility.

The proof of the quality of the manufactured products is the TÜV certificate.

It confirms the material from which they are manufactured and the TÜV TAILEGUTACHTEN / ABE for the selected products.

The product that holds the certificate is marked with a red tag above the product code.

By purchasing this product you accept the terms of service.

ABOUT SET

• After the final treatment of the product, a suitable kit is selected, the current composition is available HERE.
• The finished set is protected in foil with our company logo and then packed into a shipping carton.
• Glue may be required when installing the car overlay. In this case, we recommend using polyurethane based adhesive (self-adhesive).
• Installation of the car’s overlay should be preceded by proper preparation of the surface of the product and the body car.

INSTALLATION

• Before installing, parts must be prepared and adjusted
• Installation involves roughening and degreasing of the aggressive solvent on the surface of the car body on which we intend to mount (glue) the overlay. The 3M cloth is included in the kit for degreasing.

Installation of the overlay should follow the instructions in the manual that is included with the kit shipped or is available for download on our website.

Maxton Design designar och tillverkar styling till bilar med fokus på bland annat kjolpaket, främre och bakre stötfångare, sidokjolar, spoilers, diffusers, splitters, vingar, ögonlock och mycket mera.

Företaget grundades redan år 2004 och har idag en fullskalig och toppmodern maskinpark med allt som behövs för både design och tillverkning in-house.

Vill du att din bil ska synas? Välj då Maxton Design som din leverantör av stylingprodukter till bilen!